A flaw was found in all versions of Keycloak before 10.0.0, where the NodeJS adapter did not support the verify-token-audience. This flaw r…
A flaw was found in all versions of Keycloak before 10.0.0, where the NodeJS adapter did not support the verify-token-audience. This flaw results in some users having access to sensitive information outside of their permissions.
The product implements a protection mechanism that relies on a list of inputs (or properties of inputs) that are explicitly allowed by policy because the inputs are assumed to be safe, but the list is too permissive - that is, it allows an input that is unsafe, leading to resultant weaknesses.
https://cwe.mitre.org/data/definitions/183.html →Open in CWE collection →The product specifies permissions for a security-critical resource in a way that allows that resource to be read or modified by unintended actors.
https://cwe.mitre.org/data/definitions/732.html →Open in CWE collection →In applications, particularly web applications, access to functionality is mitigated by an authorization framework. This framework maps Access Control Lists (ACLs) to elements of the application's functionality; particularly URL's for web apps. In the case that the administrator failed to specify an ACL for a particular element, an attacker may be able to access it with impunity. An attacker with the ability to access functionality not properly constrained by ACLs can obtain sensitive information and possibly compromise the entire application. Such an attacker can access resources that must be available only to users at a higher privilege level, can access management sections of the application, or can run queries for data that they otherwise not supposed to.
https://capec.mitre.org/data/definitions/1.html →Open in CAPEC collection →Some APIs will strip certain leading characters from a string of parameters. An adversary can intentionally introduce leading "ghost" characters (extra characters that don't affect the validity of the request at the API layer) that enable the input to pass the filters and therefore process the adversary's input. This occurs when the targeted API will accept input data in several syntactic forms and interpret it in the equivalent semantic way, while the filter does not take into account the full spectrum of the syntactic forms acceptable to the targeted API.
https://capec.mitre.org/data/definitions/3.html →Open in CAPEC collection →An attack of this type exploits a system's configuration that allows an adversary to either directly access an executable file, for example through shell access; or in a possible worst case allows an adversary to upload a file and then execute it. Web servers, ftp servers, and message oriented middleware systems which have many integration points are particularly vulnerable, because both the programmers and the administrators must be in synch regarding the interfaces and the correct privileges for each interface.
https://capec.mitre.org/data/definitions/17.html →Open in CAPEC collection →An attacker supplies the target software with input data that contains sequences of special characters designed to bypass input validation logic. This exploit relies on the target making multiples passes over the input data and processing a "layer" of special characters with each pass. In this manner, the attacker can disguise input that would otherwise be rejected as invalid by concealing it with layers of special/escape characters that are stripped off by subsequent processing steps. The goal is to first discover cases where the input validation layer executes before one or more parsing layers. That is, user input may go through the following logic in an application: <parser1> --> <input validator> --> <parser2>. In such cases, the attacker will need to provide input that will pass through the input validator, but after passing through parser2, will be converted into something that the input validator was supposed to stop.
https://capec.mitre.org/data/definitions/43.html →Open in CAPEC collection →This attack targets the reuse of valid session ID to spoof the target system in order to gain privileges. The attacker tries to reuse a stolen session ID used previously during a transaction to perform spoofing and session hijacking. Another name for this type of attack is Session Replay.
https://capec.mitre.org/data/definitions/60.html →Open in CAPEC collection →The attacker induces a client to establish a session with the target software using a session identifier provided by the attacker. Once the user successfully authenticates to the target software, the attacker uses the (now privileged) session identifier in their own transactions. This attack leverages the fact that the target software either relies on client-generated session identifiers or maintains the same session identifiers after privilege elevation.
https://capec.mitre.org/data/definitions/61.html →Open in CAPEC collection →An attacker crafts malicious web links and distributes them (via web pages, email, etc.), typically in a targeted manner, hoping to induce users to click on the link and execute the malicious action against some third-party application. If successful, the action embedded in the malicious link will be processed and accepted by the targeted application with the users' privilege level. This type of attack leverages the persistence and implicit trust placed in user session cookies by many web applications today. In such an architecture, once the user authenticates to an application and a session cookie is created on the user's system, all following transactions for that session are authenticated using that cookie including potential actions initiated by an attacker and simply "riding" the existing session cookie.
https://capec.mitre.org/data/definitions/62.html →Open in CAPEC collection →An attacker may provide a Unicode string to a system component that is not Unicode aware and use that to circumvent the filter or cause the classifying mechanism to fail to properly understanding the request. That may allow the attacker to slip malicious data past the content filter and/or possibly cause the application to route the request incorrectly.
https://capec.mitre.org/data/definitions/71.html →Open in CAPEC collection →The adversary utilizes a repeating of the encoding process for a set of characters (that is, character encoding a character encoding of a character) to obfuscate the payload of a particular request. This may allow the adversary to bypass filters that attempt to detect illegal characters or strings, such as those that might be used in traversal or injection attacks. Filters may be able to catch illegal encoded strings, but may not catch doubly encoded strings. For example, a dot (.), often used in path traversal attacks and therefore often blocked by filters, could be URL encoded as %2E. However, many filters recognize this encoding and would still block the request. In a double encoding, the % in the above URL encoding would be encoded again as %25, resulting in %252E which some filters might not catch, but which could still be interpreted as a dot (.) by interpreters on the target.
https://capec.mitre.org/data/definitions/120.html →Open in CAPEC collection →An adversary is able to exploit features of the target that should be reserved for privileged users or administrators but are exposed to use by lower or non-privileged accounts. Access to sensitive information and functionality must be controlled to ensure that only authorized users are able to access these resources.
https://capec.mitre.org/data/definitions/122.html →Open in CAPEC collection →An adversary crafts a request to a target that results in the target listing/indexing the content of a directory as output. One common method of triggering directory contents as output is to construct a request containing a path that terminates in a directory name rather than a file name since many applications are configured to provide a list of the directory's contents when such a request is received. An adversary can use this to explore the directory tree on a target as well as learn the names of files. This can often end up revealing test files, backup files, temporary files, hidden files, configuration files, user accounts, script contents, as well as naming conventions, all of which can be used by an attacker to mount additional attacks.
https://capec.mitre.org/data/definitions/127.html →Open in CAPEC collection →An attacker exploits a weakness in the configuration of access controls and is able to bypass the intended protection that these measures guard against and thereby obtain unauthorized access to the system or network. Sensitive functionality should always be protected with access controls. However configuring all but the most trivial access control systems can be very complicated and there are many opportunities for mistakes. If an attacker can learn of incorrectly configured access security settings, they may be able to exploit this in an attack.
https://capec.mitre.org/data/definitions/180.html →Open in CAPEC collection →The adversary extracts credentials used for code signing from a production environment and then uses these credentials to sign malicious content with the developer's key. Many developers use signing keys to sign code or hashes of code. When users or applications verify the signatures are accurate they are led to believe that the code came from the owner of the signing key and that the code has not been modified since the signature was applied. If the adversary has extracted the signing credentials then they can use those credentials to sign their own code bundles. Users or tools that verify the signatures attached to the code will likely assume the code came from the legitimate developer and install or run the code, effectively allowing the adversary to execute arbitrary code on the victim's computer. This differs from CAPEC-673, because the adversary is performing the code signing.
https://capec.mitre.org/data/definitions/206.html →Open in CAPEC collection →An adversary gains control of a process that is assigned elevated privileges in order to execute arbitrary code with those privileges. Some processes are assigned elevated privileges on an operating system, usually through association with a particular user, group, or role. If an attacker can hijack this process, they will be able to assume its level of privilege in order to execute their own code.
https://capec.mitre.org/data/definitions/234.html →Open in CAPEC collection →Adversaries know that certain binaries will be regularly executed as part of normal processing. If these binaries are not protected with the appropriate file system permissions, it could be possible to replace them with malware. This malware might be executed at higher system permission levels. A variation of this pattern is to discover self-extracting installation packages that unpack binaries to directories with weak file permissions which it does not clean up appropriately. These binaries can be replaced by malware, which can then be executed.
https://capec.mitre.org/data/definitions/642.html →Open in CAPEC collection →| Product | Vendor | Status |
|---|---|---|
| keycloak | Tracked | |
| keycloak | * | Tracked |